




CH-2600 Extreme-Pressure Cutting Fluid
Transparent liquid with outstanding lubricity, suitable for grinding and machining center cutting.
Product Information
Temperature Fit & Selection Advice
Temperature ranges are compiled from international standards (API, ILSAC, ISO, SAE, DIN) together with the corresponding national standards, for selection reference.
5°C ~ 50°C
Marked as the system/component operating temperature range per ISO/DIN international standards and the corresponding national standards
Viscosity / Model: CH-2600
Products in the same series cover different temperature ranges by viscosity grade; select per your equipment manual.
- Recommended for use above 5°C; in cold seasons pre-heat or select a lower viscosity grade.
- Keep system temperature below 50°C; check cooling and heat dissipation if oil temperature runs high.
- If actual temperature, load or speed exceeds the ranges above, contact our technical team to confirm an alternative.
Frequently Asked Questions
Common questions about temperature range, standards, applications and ordering for CH-2600 Extreme-Pressure Cutting Fluid.
Related Products

General Purpose Grease
Multi-purpose lithium-based grease for general machinery bearings and friction points.

Construction Machinery Grease
Dedicated to heavy-load joints and pins, with impact resistance, water resistance and strong adhesion.

High & Low Temperature Grease
Synthetic base oil formula with a wide temperature range, high dropping point at high temperature and low torque at low temperature.

Automotive Grease
Dedicated to automotive wheel hub bearings, universal joints and chassis points, with high-temperature and water resistance.