




Construction Machinery Grease
Dedicated to heavy-load joints and pins, with impact resistance, water resistance and strong adhesion.
Product Information
Temperature Fit & Selection Advice
Temperature ranges are compiled from international standards (API, ILSAC, ISO, SAE, DIN) together with the corresponding national standards, for selection reference.
-25°C ~ 140°C
Marked as the system/component operating temperature range per ISO/DIN international standards and the corresponding national standards
Viscosity / Model: CM-G2
Products in the same series cover different temperature ranges by viscosity grade; select per your equipment manual.
- Suitable for ambient temperatures above -25°C; below that, pre-heat the equipment or choose a lower viscosity grade.
- Suited to continuous duty with system temperature up to 100°C; shorten drain intervals at higher temperatures.
- If actual temperature, load or speed exceeds the ranges above, contact our technical team to confirm an alternative.
Frequently Asked Questions
Common questions about temperature range, standards, applications and ordering for Construction Machinery Grease.
Related Products

General Purpose Grease
Multi-purpose lithium-based grease for general machinery bearings and friction points.

High & Low Temperature Grease
Synthetic base oil formula with a wide temperature range, high dropping point at high temperature and low torque at low temperature.

Automotive Grease
Dedicated to automotive wheel hub bearings, universal joints and chassis points, with high-temperature and water resistance.

Metallurgy Grease
Dedicated to high-temperature heavy-load metallurgical equipment, with high-temperature, heavy-load and water washout resistance.