L-CKC Medium-Load Industrial Enclosed Gear Oil
L-CKC Medium-Load Industrial Enclosed Gear Oil 1
L-CKC Medium-Load Industrial Enclosed Gear Oil 2
L-CKC Medium-Load Industrial Enclosed Gear Oil 3
L-CKC Medium-Load Industrial Enclosed Gear Oil 4

L-CKC Medium-Load Industrial Enclosed Gear Oil

Brand:Wanxiang
Model:L-CKC 68/100/150/220/320/460/680
MOQ:16L
Price:Price on request
Payment Terms:Prepayment
Supply Capacity:Ample
Temperature Range:-5°C ~ 95°C

Excellent oil-water separation and anti-foam properties, with effective oil film protection.

Product Information

Product NameL-CKC Medium-Load Industrial Enclosed Gear Oil
BrandWanxiang
ModelL-CKC 68/100/150/220/320/460/680
MOQ16L
PricePrice on request
Supply CapacityAmple

Temperature Fit & Selection Advice

Temperature ranges are compiled from international standards (API, ILSAC, ISO, SAE, DIN) together with the corresponding national standards, for selection reference.

Operating Temperature Range

-5°C ~ 95°C

Marked as the system/component operating temperature range per ISO/DIN international standards and the corresponding national standards

Selection Basis

Viscosity / Model: 68/100/150/220/320/460/680

Specifications: ISO 12925-1 CKC·DIN 51517-2 CLP / GB 5903-2011

Products in the same series cover different temperature ranges by viscosity grade; select per your equipment manual.

Recommendations
  • Recommended for use above -5°C; in cold seasons pre-heat or select a lower viscosity grade.
  • Keep system temperature below 95°C; check cooling and heat dissipation if oil temperature runs high.
  • If actual temperature, load or speed exceeds the ranges above, contact our technical team to confirm an alternative.
Match products by industry, equipment and operating temperature

Standards Comparison & Typical Applications

Standards are shown with the international standard alongside the corresponding GB/industry standard; the table below lists equivalent international standards and typical applications for each.

Standard (GB / Industry)Equivalent International StandardsTypical Applications / Duty
GB 5903-2011ISO 12925-1 CKC/CKD, DIN 51517-2/3 CLPMedium-load reducers for fans, pumps and conveyors; heavy-load enclosed gear drives such as rolling mills, grinding mills and kiln drives

Standards are provided for equivalence reference; test methods and limits differ between systems. Always follow the product datasheet and equipment manual.

Frequently Asked Questions

Common questions about temperature range, standards, applications and ordering for L-CKC Medium-Load Industrial Enclosed Gear Oil.