Lubrication Knowledge2025-04-08

How to Set Grease Replacement Intervals: Starting with Operating Conditions and Temperature

Explains how grease replacement intervals are affected by temperature, speed, load, and sealing conditions, and offers reference methods for setting a replacement plan.

How to Set Grease Replacement Intervals: Starting with Operating Conditions and Temperature

There is no single answer for grease replacement intervals; they are closely related to operating temperature, speed, load, and sealing conditions. The higher the shaft temperature and the faster the speed, the faster the grease typically oxidizes and is lost.

In environments with heavy dust, high moisture, or poor sealing, external contaminants easily enter the bearing, so the replacement interval should be shortened appropriately, and timely grease replenishment should be ensured.

When setting a replacement plan, you can first follow the reference interval given in the equipment manual, then adjust gradually based on temperature changes, vibration, and noise during operation.

For important equipment that runs continuously, it is advisable to record the time and amount of each grease replenishment and replacement to form a comparable maintenance log, making it easier to determine a suitable interval later.

Key Highlights

  • Temperature and speed are the main factors affecting the interval
  • Good sealing can significantly extend service life
  • It is advisable to adjust the replacement plan gradually based on operating status
Lubrication KnowledgeGreaseBearing Lubrication